i hope this starts are real good thread. CUTTING THICK VINYL (For CorelDraw versions 5 to 9) With reflective, phosphorescent or any other vinyl that is too thick for your plotter to cut, you can duplicate your lettering on exactly the same position by pressing the "Plus" (+) key. By doing this your plotter will run the blade over the lettering twice. This principal will also work in other sign-cutting applications.
REMOVING OVERLAPS FROM SCRIPT LETTERING (For CorelDraw versions 7.467 & 8) Enter a line of script text. Go to "Arrange" menu and click on "Weld", a dialog box will appear. Click on the "Weld To" button and then point the arrow to your line of text and click.
[ May 07, 2002, 03:30 AM: Message edited by: Curtis hammond ]
Posted by A Signs (Member # 1425) on :
Curtis, I see that you have been to our web site ( http://www.asigns.com ). There is quite a few more on our CorelDRAW Sign Tips page
curt...the original ver 7 of corel the weld feature was screwed up, didnt work. the 7.467 revision fixed it..thats why the tip was there. corel 3,4,5,6, 8,9,10 all worked right from the get go.
Posted by A Signs (Member # 1425) on :
Curtis, The people at Smart Artz sell some of our products and have also have some of our tips and downloads. You can also find the same tips at http://www.signwizard.co.uk/... SignWiard UK are also resellers of our products. I wrote the tips around the time CorelDRAW 9 was released.
If anyone has a good Corel tip I would love to hear from them.
