hoping someone out there may have access to a key to the city. Preferably 12 inch in size...can be plastic or metal with a gold look. Or if you have another idea...send it along. I checked with my trophy guy and he only has 5" ones that attach to a plaque. Thanks ahead of time. Mick
Posted by old paint (Member # 549) on :
can you get a piece of plywood, make a pattern of an old type key, trace it to plywood, cut out, prime and paint.......
Posted by Bob Rochon (Member # 30) on :
Joe's got the right idea, you could also use HDU it would be easier to round the edges to look like a key.
Posted by Chuck Churchill (Member # 68) on :
I just had two made for a company that has a key as their logo. One went on the front door and one on the reception wall. We used gold mirror Octolux (then finished aluminum) laminated to black 1/4" PVC. The bigger one was 14" long. I have a supplier with computer controlled routers that make this kind of stuff from AI or DXF files.
Could have one made for you if you would like but it would likely take a while to get it to you.
I have found it very beneficial to make friends with someone with a computer controlled router. Thier is lots of things like this that they can make.
