I'm looking for a source of a nice looking wall mounted frame to put banners in. They would need to be made to fit my banner size and be able to easily change the banner. Cost is an issue also as always. I found one supplier at a ballpark cost of $150 to $200 each. These have a spring loaded frame that snaps shut on the banners edge.
Any ideas?? Thanks
Posted by old paint (Member # 549) on :
funny you should ask...just saw a neat(but not cheap) banner install. this guy put up a banner must be 24" x 30 feet. what he did was made alum brackets(1" x 1/4" solid strap)(4 of these) and bent and drilled to fit tightly on a 12"x 12" post. then on these he attached eyebolts. then he ran 1/4 steel cable top and bottom, attached banner to cables with S-hooks, and one one end he used those cable tightners...to take up slack and make banner tight.
Posted by Dave Sherby (Member # 698) on :
Creative Banner (800-528-8846) has something that may work for you. It isn't exactly a frame but it will mount a banner against a wall. Its called Banner-Trak and consists of an upper and lower rail that mounts to the wall. Provided "sliders" attach the banner to the track thru the grommets. Their kit is $29.95 and includes two 4' traks, a connector and 4 sliders. Extra sliders, sections, and other accesories are available. Looks slick.
Posted by VICTORGEORGIOU (Member # 474) on :
The banner trac described above looks good and is easy to use. I think Speed Press and Ameriban have them also.
