The graphics are painted on and from the thickness of the paint appears to have been rolled on, and then cleared over.
I can use the other side of the bus to trace the graphics onto paint mask, so that doesn't seem to big of a problem, but I'm not schooled in the types of paint to use for such a job.
A little guidance in pricing would be helpful too. The main graphic is 2 colors (black/yellow). 2 black "swooshes" with a yellow drop (approx. 4'x15'). Also the words "Neal's Motor Coach" 18"x 15'.
I'm in downtown Atlanta, where the cost of living is getting higher and higher so the pricing doesn't have to be too low, the job is an insurance job, and the cost of repairing all the other damage to the bus is already in the $80,000 range, and the shop that is doing the repair work is my customer. I am basically the only person he calls to repair graphics on jobs he does. I do need to leave a little room for my customer to tack on his share, usually 10% - 15%.
Any help would be appreciated. More so about the paint and technique, but pricing help would be nice too.
thanks alot
john
------------------
MacElite, aka John Rodgers
Prodigy Sign Systems
Atlanta, GA
------------------
Si Allen #562
La Mirada, CA. USA
(714) 521-4810
ICQ # 330407
"SignPainters do It with Longer Strokes!"
95% of all accidents occur immediately after the words "Hey...watch this."
Brushasaurus on Chat
Gladly supporting this BB !
------------------
J.T. Gazaway
J.T. Graphic Design
www.jt-graphicdesign.com
jt@jt-graphicdesign.com