I need custom shapes cut from a sheet of FR plastic. Please e-mail me if you can help me out.
Thanks!
------------------ Kelli Cajigas aka Janda Dolphin deSigns & Banners “A satisfied customer will tell two friends, a dissatisfied customer will tell ten.”
Posted by Cheryl Lucas (Member # 1656) on :
Kelli:
What is FR plastic?
Email address?
Someone here in SW Florida wants to know...
Cher.
------------------ Cheryl Lucas a/k/a "Shag" on MIRC Vital Signs & Graphics, Etc. Cape Coral, Florida VSignsNgraphics@aol.com
Posted by ErnieBalch on :
Some one here in New York wants to know what FR plastic is. What's your e-mail address?
Diane Balch Balch Signs We Wholesale Carved and Routed Signs e-mail signs@balchsigns.com 1045 Raymond Rd Malta, NY 12020 (518) 885-9899
------------------ Balch Signs 1045 Raymond Rd Ballston Spa, NY 12020 Wholesale Routing
http://home.nycap.rr.com/balchsigns/
Posted by Cheryl Lucas (Member # 1656) on :
Thanks fer asking Ernie/Diane, I was wondering there for a minute, that I should have been reading between the lines!
------------------ Cheryl Lucas a/k/a "Shag" on MIRC Vital Signs & Graphics, Etc. Cape Coral, Florida VSignsNgraphics@aol.com
Posted by Kelli (Member # 248) on :
Hi guys, e-mail addy is dolphindesigns@bellsouth.net FR plastic is fiberglass reinforced. One of the commercial brand names is FiberBrite. It requires a carbide steel blade with a minimum of 60 teeth to cut it. I had a guy down in Marathon who would cut it for me using a state of the art vacuum table computerized router system, but he is only down here during the winter. The stuff I'm needing cut is specially coated to accept dye sublimation so I will need to have it shipped from Alabama directly to whoever can do the custom cuts. I can provide the template in CorelDraw or convert to eps.
------------------ Kelli Cajigas aka Janda Dolphin deSigns & Banners “A satisfied customer will tell two friends, a dissatisfied customer will tell ten.”
