This is topic Need Camm 1 Tech Help ... Pleeez ? in forum Old Archives at The Letterville BullBoard.


To visit this topic, use this URL:
http://www.letterville.com/ubb/ultimatebb.php/topic/13/1785.html
Posted by Wayne Marchant (Member # 1277) on :
 
Any Camm 1 users that can give me some pointers on configuring mine???????
I'm sure what I'm trying to do is not too complicated.
I've got 2 pre-paid vinyl jobs waiting too. So I have to get it FIXED. Thanks

Feel free to e-mail me personally !

Thanks
V Wayne

------------------
V.Wayne Marchant (pronounced marsh-ant)
Vancouver,BC,Canada
opticart@lightspeed.bc.ca
http://www.signsplusmore.com


 

Posted by Ron Percell (Member # 399) on :
 
Is it hooked to the computer?

Is it plugged in?

Most folks just want to know that it should be set in "Expand X Mode", but beyond this you'll have to provide more info.

------------------
Ron Percell
Percell Signs
707-769-0639
Petaluma, California

Home of the MicroMeet!

percell@percellsigns.com

Percell Signs Web Site


 

Posted by Ian Wilson (Member # 177) on :
 
what model camm1 do you have I have two different models and have just replaced an old model and all three are different need more info

------------------
Ian Wilson
Signmaker Toowoomba City Council
Cnr Anzac Ave & Stephen st
Toowoomba Queensland Australia
may all your toubles be little ones
The man that never make a mistake never makes anything


 

Posted by Dave Grundy (Member # 103) on :
 
Wayne....I e-mailed you some infromation. If that doesn't answer your questions, give me a call at 519-225-2634 and I'll walk you through whatever is else is wrong. You have been using the cutter for 7 or 8 months now, so whatever is not correct can't be that much of a problem.

By the way....DON'T change any of the settings on the panel at the front of the cutter. They were set correctly when you recieved the cutter!!!!!!!

------------------
Dave Grundy
AKA "applicator" on mIRC
"stickin' sticky stuff to valuable vessels and vehicles!"
in Granton, Ontario, Canada
1-519-225-2634
dave.grundy@quadro.net
www.quadro.net/~shirley


[This message has been edited by Dave Grundy (edited February 18, 2001).]
 



Powered by Infopop Corporation
UBB.classic™ 6.7.2