This is topic 1 Shot UV Acrylic Clear in forum Old Archives at The Letterville BullBoard.


To visit this topic, use this URL:
http://www.letterville.com/ubb/ultimatebb.php/topic/13/1762.html
Posted by Doug Fielder (Member # 803) on :
 
Has anyone tried adding 1-shot hardener to their new Fast Drying UV Acrylic Clear? If so, what were your results?

Thanks Again,
Doug Fielder
FSD Concept & Design
Wall, NJ

------------------
Doug Fielder
 

Posted by Stephen Deveau (Member # 1305) on :
 
I have used the 4007 hardener in the UV clear with good results....Mixing ratio is about 5-6 drops to 3-4oz..
It mixes a little cloudy but drys clear..
It helps the UV stiffen and not as soft as it is on it own..

Hope this helps!
Raven/2001

------------------
Raven/2000
Airbrushed by Raven
Lower sackville N.S.
deveausdiscovery@sprint.ca

 



Powered by Infopop Corporation
UBB.classic™ 6.7.2