The Letterville BullBoard: Rink Ice Graphics

This is topic Rink Ice Graphics in forum Old Archives at The Letterville BullBoard.

To visit this topic, use this URL:
http://www.letterville.com/ubb/ultimatebb.php/topic/13/821.html

Posted by Ken Colwell (Member # 249) on :

Can anyone let me know as to what to us under a curling rink for vinyl? This ad will be under ice, will styrene work?
Will I need any other materials to work with this 18" by 40" detailed ad with text an graphics in 3 colors?

I had one post on this one so far, guy told me to do a search on the topic but I had no success. Is this not the place to ask such a Question or what?

------------------
Ken Colwell

Posted by J & N Signs (Member # 901) on :

Hi Ken.
Ice Graphics are normally done with paint and water is sprayed on top until an adequate coating is obtained. Go to search at the search and enter arena as a search word and you should get some posts on the subject.

------------------
Mario G. Lafreniere aka Fergie.

http://www.onlink.net/~mgl

jnsigns@onlink.net
Chapleau, Ontario home of "The World's Largest Game Preserve"
Spring is upon us,in Shania Country. Farewell Mosquito here comes the Snow!
"Go figure" got me 30 cords of wood and haven't seen a snow flake yet!

"I cut it twice and it's still too short!"

[This message has been edited by J & N Signs (edited December 13, 2000).]

Posted by Jim Doggett (Member # 1409) on :

Hi Ken:

Digital works just fine, provided the image is water resistant. Pigment injket on water-proof media, or outdoor prints such as Thermal Transfer, Scotchprint, Solvent inkjet, etc.

Chip away the ice, lay down the image, top with water.

Regards,

------------------
Jim Doggett
Vice President
Summa, Inc.

UBB.classic™ 6.7.2