Well folks i finally can post images now let me know if this works!! (still workin on the site though!) ..... This is a cruiser i lettered for a new k-9 unit here in sharpsville!! I used the imagecut feature in signlab to create the picture of the dog using bandwidths like in a color tv! Let me know what you think!
------------------ Ryan Ursta Ursta Graphics 27 West Shenango St. Sharpsville Pa. 16150 Call: 724•962•2206 "letters of Recommendation"
Known as "Ugraph" on mirc
Posted by Barry Branscum (Member # 445) on :
an attempt
------------------ Master's Touch Signs & Screenprinting Clinton AR 5017456246 ICQ 17430008 "Imagine the Possibilities..."
Posted by Ryan Ursta (Member # 1738) on :
Well since that worked here's the whole thing!
------------------ Ryan Ursta Ursta Graphics 27 West Shenango St. Sharpsville Pa. 16150 Call: 724•962•2206 "letters of Recommendation"
[This message has been edited by Wizsigns (edited December 07, 2000).]
[This message has been edited by Wizsigns (edited December 07, 2000).]
Posted by Nevman (Member # 332) on :
Looks nice Ryan...
Here's a tip for your files to load faster...
Shrink the size of the picture down to about 2" - then export as a JPG with 75 dpi. Images will load quicker that way.
Good luck...
------------------ Pat Neve, Jr. Sign Man, Inc. 4580 N. US 1 Melbourne, FL 32935 321-259-1703 signman@signmaninc.com Capt. Sign Letterville Constituent constituent: "One of the individual entities contributing to a whole"
Posted by Stephen Deveau (Member # 1305) on :
Nice work Ryan but I will ask this one thing. I noticed in the K 9 there was some bubbles. Don't get me wrong but for such a small application...How come!!!! Seeing the background and knowing that it is the cold season,you must have done it outdoors... You used metalic gold for the main lettering and it's one of the softest vinyl's on the market... Next project take a heat gun to the vinyl before you apply and give it a good blast of heat and also the surface you are going to apply on then peel the background paper and lay on the surface...Work from left to right top to bottom with a soft card or roller... This time of year will not get all the air pockets out as you need the warm sun to do this.... I know you will look at this message and say who are you but believe me from past experience this way is the best....
Raven/2000
------------------ Raven/2000 Airbrushed by Raven Lower sackville N.S. deveausdiscovery@sprint.ca
Posted by Ryan Ursta (Member # 1738) on :
Hey guys those werrent bubbles ... the car was just washed!!!!!! I'd tear off the graphic and shoot myself if those were bubbles !!!!! Oh no !!!!
------------------ Ryan Ursta Ursta Graphics 27 West Shenango St. Sharpsville Pa. 16150 Call: 724•962•2206 "letters of Recommendation"
Known as "Ugraph" on mirc
Posted by old paint (Member # 549) on :
RUN THE FUZZ IS HERE!!!!!!!!!!!!
------------------ joe pribish-A SIGN MINT 2811 longleaf Dr. pensacola, fl 32526 850-944-5060 BEWARE THE TRUTH.....YOU MAY NOT LIKE WHAT YOU FIND
Posted by Ryan Ursta (Member # 1738) on :
The stuff you see is droplets of water!!! not bubbles .....way to go now you embarrased me bud ! ha ha ha just kiddin
By the way. The photo of the shepherd is totally vinyl!!! Cut in small bandwidths. Anyone that has questions on it feel free to ask!!
------------------ Ryan Ursta Ursta Graphics 27 West Shenango St. Sharpsville Pa. 16150 Call: 724•962•2206 "letters of Recommendation"
Known as "Ugraph" on mirc
Posted by Robert Thomas (Member # 1356) on :
Very, very cool cop car, Ryan. Fill us in on the bandwidth thing.
------------------ Robert Thomas Creative Signs In Beautiful Naples, Fl.
Posted by Tim Whitcher (Member # 685) on :
Ryan, Casmate Pro SE has the same thing, but they call it "Photo Cut". I use it primarily for realty agent's mugs. How did you do the fade on the blue side-stripe?? Nice job, all around.
------------------ Tim Whitcher Quality Signs & Design 107 E Adrian St Blissfield, MI 49228 qualitysigns@cass.net
Posted by Henry Barker (Member # 174) on :
Nice work Ryan!
Gotta say I laughed loads at the bubble thing, he was tryig to say it in as nice away as he could!! I know here how waterdroplets hang in the cold weather!
Tell us about the bandwidths....what do you mean all vinyl?...printed?? or what.
------------------ Henry Barker #1924 akaKaftan SignCraft AB Stockholm, Sweden. A little bit of England in a corner of Stockholm www.signcraft.se info@signcraft.se
Posted by Neil D. Butler (Member # 661) on :
Hey Ryan it looks real "Sharp"! Neil
------------------ "Keep Positive"
SIGNS1st. Neil Butler Paradise, NF
Posted by Stephen Deveau (Member # 1305) on :
Ok Ryan I will have to say that I am sorry about the comment as I guess I need glasses.. It is nice work and I like to know about the image affect on the dog!!! You say that its not edge work but all vinyl! Kick me in the ass for the comment and because you live to far away I kick myself for you...I tried to but kept falling down.
Raven/2000
------------------ Raven/2000 Airbrushed by Raven Lower sackville N.S. deveausdiscovery@sprint.ca
Posted by Pierre St.Marie (Member # 1462) on :
That's what I ALWAYS tell 'em.............WATER drops! Don't WORRY! They'll evaporate........honest! :^)
------------------ St.Marie Graphics & Makin' Tracks Sound Studio Kalispell, Montana stmariegraphics@centurytel.net http://www.stmariegraphics.com 800 735-8026 We're chiseling every day of the week! :^)
Posted by Rick Sacks (Member # 379) on :
Image-cut/Photo-Cut....I'd like to know more about it. Can you get into more detail in describibg how to do it and what it is and show a closed detail photo? Thanks.
------------------ The SignShop Mendocino, California "Where the Redwoods meet the Surf"
Posted by Ryan Ursta (Member # 1738) on :
Ok Guys here goes! Image cut is a feature in signlab which cuts a photo out of thin bandwidths. I know casmate has this feature also because i used to use it for the company i previously worked for I believe you can do this in corel also using the woodcut feature (i'm still workin on how to do it in corel!). What you have to do first is thake a photo convert it to black and white... Then if you are putting the image on a black background using white vinyl .. you must convert the image to a negative to get the black to show up as the majority color. Then you just go to the image cut feature in signlab... it will ask you how many bandwidths you want to put on the photo ... this determines the resolution. Usually i make sure that i dont have to weed strips which are smaller than 1/8". So you can just keep playing with it until you get the amount of strips needed to to equal this amount. You can put the image in a circle if you want by laying a circle over the image where need be .. this will create an almost vignette or if you make the photo itself a vignette it will cut it to look like one! Youre ready to plot after this .... make sure your blade is set deep for easy weedin' Caus there's a lot to do ... (i usually set my summa at 155 grams and have the blade set in the handle in the neutral position) Well then all you have to do is weedit tapeit and sticker on . My plotter can cut this so that all i have to do is grab a corner and pull! if yours isnt as accurate you can just pick the lines out a couple at a time by just pulling up the edge of each line , but make sure you skip the lines in between!
Well as mikey said "Try it , youll like it"
------------------ Ryan Ursta Ursta Graphics 27 West Shenango St. Sharpsville Pa. 16150 Call: 724•962•2206 "letters of Recommendation"
Known as "Ugraph" on mirc
Posted by roger bailey (Member # 556) on :
All this small talk about bubbles! hmmm, Roger
------------------ Roger Bailey Rapid Tac Incorporated Waikoloa, Hawaii
Posted by Scott Moyer (Member # 1433) on :
Who's ron the cop or the dog ? ah what's the difference.
------------------ Scott Moyer Promised Land Pennsylvania 570-595-0310
