I have a customer who has an HDU sign with damage that was made by a company that is no longer in business. A few golfball size chunks have been broken out. This is a 8' x 3' single sided sign. What's the best method to use in repairing this sign??
I haven't a clue, since we don't sell HDU signage.
Thanks, ahead of time!
Tim
------------------ Tim Whitcher Quality Signs & Design 107 E Adrian St Blissfield, MI 49228 qualitysigns@cass.net
Posted by Dave Draper (Member # 102) on :
Hi Tim,
I would probably mix us some Durham's Rock Hard wood putty and shove in the holes. If they are bigger, you might have to get some expanding spray insulation and squirt in there first.
------------------ Draper The Signmaker Bloomington Illinois USA
Posted by Jack Davis (Member # 1408) on :
Tim, I haven't tried it yet, but have decided that if I need to repair a large hole in HDU I wills core a round hole out in the damaged piece, and friction fit a round core into the hole to fit as closely as I can lubed with a light coat of HDU glue. If you let in protrude slightly and dry, you should be able to shave or sand off the extra and use conventional methods of filler and paint to redo. Many will say bondo, and it will probably work, but it will shrink a lot in heavy use areas and swell like hell when exposed to the suns heat. I would use only minimal bondo. Bronzeo
[This message has been edited by bronzeo (edited November 03, 2000).]
Posted by Joe Scienski (Member # 1701) on :
Tim,
Both the above fixes will work well. Make sure that any filler is catalized so it will dry correctly and will not shrink. If you have any other questions regarding repairs, call me @ 800 338 4030.
Joe
------------------ Thanks, Joe Sign•FoamII Dana Point, CA, USA
Posted by Pierre St.Marie (Member # 1462) on :
Actually Jack's method is the better one. More positive, but make SURE you use HDU glue. It's a specific and expands. Feel free to call me too on the toll free............since I taught Joe everything he knows and he's forgotten a bunch of it already. :^)
------------------ St.Marie Graphics & Makin' Tracks Sound Studio Kalispell, Montana stmariegraphics@centurytel.net http://www.stmariegraphics.com 800 735-8026 We're chiseling every day of the week! :^)
Posted by Si Allen (Member # 420) on :
Pierre...before ya taught joe.... he didn't know nothing...now he knows twice as much!
------------------ Si Allen #562 La Mirada, CA. USA (714) 521-4810 ICQ # 330407 "SignPainters do It with Longer Strokes!"
