Yesterday I trimed a shaped, aluminum faced ply sign with plastic edge trim. I used an interior/exterior white silicone (supposed to be guaranteed for 50 years)
I checked it this morning, and the silicone is still as wet as it was when I put it on. This was an opened tube that has been used before, so I don't know what gives.
Should I give it a couple of days to dry, or should I clean it off and start again with a fresh tube? Anyone ran into this before?
Thanks
Sue
------------------ "It is never too late to be what you might have been." -George Eliot
Suelynn Sedor Sedor Signs Carnduff, Sk Canada
Posted by ErnieBalch on :
Make sure it's warm enough and not too dry in the shop.
Silicone RTV needs moisture from the air to react. It makes acetic acid and cures. It should have a slight vinegar smell if it's curing.
ernie
------------------ Balch Signs 1045 Raymond Rd Ballston Spa, NY 12020 Wholesale Routing
http://home.nycap.rr.com/balchsigns/
Posted by Ian Wilson (Member # 177) on :
have found this happens if the edge seals to tight and keeps the air out just like it was still sealed in the tube could be the problem
------------------ Ian Wilson Signmaker Toowoomba City Council Cnr Anzac Ave & Stephen st Toowoomba Queensland Australia may all your toubles be little ones The man that never make a mistake never makes anything
Posted by Ian Wilson (Member # 177) on :
have found this happens if the edge seals to tight and keeps the air out just like it was still sealed in the tube could be the problem
------------------ Ian Wilson Signmaker Toowoomba City Council Cnr Anzac Ave & Stephen st Toowoomba Queensland Australia may all your toubles be little ones The man that never make a mistake never makes anything
Posted by Chuck Peterson (Member # 70) on :
I use a product called Lexel. It's similar to silicone but it sticks better. I have never had a problem with a sign coming loose in over ten years. I've removed many signs that appear to have been installed or fastened together with silicone, and although I can't tell what brand they used, it peels right off of some smooth surfaces. I swear by Lexel. I use it for all kinds of stuff. It's paintable, too. It dries/cures about as fast as silicone and also requires some moisture to set, but Ive never had a problem with it not drying, even in dry weather, which we get a lot of here.
[This message has been edited by Chuck Peterson (edited March 10, 2000).]
Posted by Ian Wilson (Member # 177) on :
my son just reminde me of a product called stikaflex that use in body shop repairs for sealing and there is another one of the same brand that actually holds the new cars together instead of welding it appears to be the same stuff that holds the fa18 fighter aircraft together if it can do that it must be good
------------------ Ian Wilson Signmaker Toowoomba City Council Cnr Anzac Ave & Stephen st Toowoomba Queensland Australia may all your toubles be little ones The man that never make a mistake never makes anything
Posted by bruce ward (Member # 1289) on :
This may sound stupid but I have never had luck with colored silicone. Clear will hold to anything. We used white when we were out and were desperate and your right It for some reason never dried and it would not even hold Gemini letters to dryvit! This was on a warm day also. Could be the problem, do not know!
------------------ if you wanted it tommorow...you should have called last week!
bruce ward visual images montgomery, al visual8@mindspring.com
Posted by John Smith (Member # 1308) on :
do not use any latex or "siliconized latex" silicone for adhesive. (use that to seal the edges of your MDO) Use only 100% PURE CLEAR silicone. Available at Wal-Mart, K-Mart, most hardware stores... It "cures" when exposed to the moisture in the air... in dry climates, spray some water on the surfaces after you have your items pinned in place. (Just be sure to remove any traces of factory oils prior to mounting) Here in Georgia, our humitiey is about 90% all the time and i still spray with water.....
------------------ John Smith Kings Bay Signs Kingsland, GA ICQ# 5165335 John@FineWoodSigns.com >>> inovator extraordinar <<< www.finewoodsigns.com
Posted by David Fisher (Member # 107) on :
Sikaflex rules. Can't speak highly enough of it. Enjoy, David
------------------ D.A. & P.M. Fisher Signwriting Brisbane Australia da_pmf@yahoo.com
Posted by Glenn Taylor (Member # 162) on :
When I first saw the headline, I thought this was gonna be a "pamela anderson" joke.
