Does anyone have a diagram, plans or any ideas on making a work table. This is for application of vinyl to substrate. Fairly large with a possible lift up top.
Thanks
Posted by Si Allen (Member # 420) on :
Chech your Email! Posted by Santo (Member # 411) on :
Si, Could you send me one of those e-mails. My application table is needing an upgrade.
Posted by Joe Rees (Member # 211) on :
I'm curious too. How 'bout posting that pic Si? Thanks.
Posted by Joe Rees (Member # 211) on :
Si emailed me the pic of his bench. Here it is for all interested. Posted by Ian Wilson (Member # 177) on :
I have a big old draughting table with an 8ft by 4ft top fitted and it is great because you can adjust the height and the angle with the touch of a lever and a pedal I pcked it up from a second hand office supply cost me $50.00 and the price of the ply for the top which I had laminated works great for me I have two
Posted by timi NC (Member # 576) on :
One of the handiest parts of all the tables I've ever made were a set of heavy duty locking casters.It looks like they would be the just the finishing touch to Si's diagram.
Posted by Si Allen (Member # 420) on :
OOOPS!!! Slight goof! The parts list somehow wound up with the wrong one pasted on that print.
I used coated deck screws to asseble it... no pounding with a hammer, don't come loose, and don't rust! (I built 2 of these, and the live outside.) The tops are 3 1/2 X 7 1/2 so that I can coat out a 4x8 and still coat the edges, without making a mess! Some people might want to use 3/4 inch MDO for the top, if they will be subject to heavy use.
[ September 29, 2001: Message edited by: Si Allen ]
Posted by Joe Rees (Member # 211) on :
Hey, this thread got me thinking about the old weeding table we used to have at New City Signs in St. Pete FL - (Nettie will remember a lot of hours logged under this contraption). This rack is a great companion for any weeding table and doubles as a work order organization area. The other refinement we had on the table were drawers along both sides to hold all the cutters, blades, squeeges, markers, etc. I can't wait till I get to build my next one.
[ September 29, 2001: Message edited by: Joe Rees ]
