Does anyone have a good used Grain Fraim(sp?) you would sell? Posting for a friend. Thanks!
Posted by Rick Sacks (Member # 379) on :
I made mine. Wood frame, tie wire, and staples.
Posted by Gerald Barlow (Member # 3477) on :
I made mine also. 2x4s and a small roll of bailing wire from the local home depot. I drill small holes in the side bars about a half inch apart...all the way down the frame bar. Pull the wire tight as it will sag on use and help the grain image. Mine has lasted over 10 years so far.
Posted by Wayne Webb (Member # 1124) on :
I made mine too; a large one and a smaller one. Strung them with stainless steel MIG welding wire. But the person I'm posting for just wants to buy a used one I think.
