The Letterville BullBoard: Corel and Cutting Master

This is topic Corel and Cutting Master in forum Letterhead/Pinstriper Talk at The Letterville BullBoard.

To visit this topic, use this URL:
http://www.letterville.com/ubb/ultimatebb.php/topic/1/63096.html

Posted by Warren Schoff (Member # 5527) on :

I'm seeking help. I had to reinstall Corel X5 and and then reinstalled Cutting Master 3 and now I'm getting "Could not connect to CorelDRAW"

Posted by Dave Grundy (Member # 103) on :

You might have to provide a bit more info.

What operating system, for example.

When I upgraded to Win 10, with Corel X3 already installed, Corel worked fine. But at one point I had to re-install Corel X3 and certain features didn't work. So I had to upgrade to the newest version of CorelDraw.

Have you tried to set up CorelDraw to cut directly to your cutter?

Posted by old paint (Member # 549) on :

cut direct from corel.....

Posted by Dave Grundy (Member # 103) on :

Are we agreeing Joe??? [Big Grin]

Posted by old paint (Member # 549) on :

corel draw X3, no longer has the updates for it on the web site. been a couple years since they PROVIDED any. if you d/l and kept the updates in a directory then it was ok. i still run X3 with all updates & zero problems with it. i have corel X7, also on same machine. always have cut STRAIGHT OUT OF COREL.....get the driver from the roland web site.
cutting master is associated with GRAPHTEC...probably why he needs it.....

Posted by Dave Grundy (Member # 103) on :

You're preaching to the choir, if your comments are meant for me Joe! [Rolling On The Floor]

Posted by old paint (Member # 549) on :

just stating facts.....from my experience.......

UBB.classic™ 6.7.2