It's been a while. I am removing some graphics from a Black Honda Element that has been "edge sealed" with 3M 3950 edge sealer. The graphics have come off great yet, I am left with a hard coated ridge of this edge sealre. I thought I would check here first to see of a remedy to remove it before I break out the acetones and laquer thinners.
Any help would be appreciated.
Posted by Checkers (Member # 63) on :
Hiya Corey, The few times I've run into edge sealer, it came off by scraping it with my fingernail or plastic blade. I couldn't tell you if it was 3M though. Although I have used the seal-it pen in the past, I only use edge sealing tape now.
Havin' fun,
Checkers
Posted by Neil D. Butler (Member # 661) on :
"Seams" 3M is over rated.
Posted by Bill Lynch (Member # 3815) on :
We just finished cleaning a bunch of it off a van. used our usual Auto Body adhesive cleaner and then alcohol. Lousy job , took way too long.
Posted by stein Saether (Member # 430) on :
Ive never sealed a 3M cast vinyl, doubt it nessesary
![[Smile]](smile.gif)