I need a supplier that can do either offset printing or digital printing on card stock, double sided with a contour cut.
Screen printing won't do for this artwork.
Any Help would be appreciated.
[ December 12, 2008, 04:43 PM: Message edited by: Bob Rochon ]
Posted by Glenn Taylor (Member # 162) on :
I've used 4over.com for something like that almost 2 years ago. They did a great job.
.
Posted by Bob Rochon (Member # 30) on :
Thanks Glenn,
I called them but they don't do the size of what I need.
These signs are 9.5"x34" double sided printed on a show card like material. Contour cut.
Posted by DianeBalch (Member # 1301) on :
Did you try Stouce.com
Diane
Posted by Laura Butler (Member # 1830) on :
call Wild Bill Betz, Kevin Betz father. 586-469-7676
Posted by Glenn Taylor (Member # 162) on :
Sorry about that Bob. Have you contacted a Gerber distributor to see if they have a client who has purchased a Solara + cutter combo unit?
Posted by Gene Golden (Member # 3934) on :
Bob, How many? If it's contour cut, I'm assuming that both sides are symmetrical? Can't it be printed, and then both sides cut out by hand? The registration may cause a lot of problems if they don't layout EXACTLY on both sides of the print.
