I have a couple of large propane tanks to quote on. The designs are fairly simple (one and two color) and I can set up some pounce patterns and knock it down almost entirely with foam brushes at this scale.
Just wondering what kind of a price/sq ft would fit this one.
Thanks in advance... Rapid
Posted by Si Allen (Member # 420) on :
Hmmmm....large? 6 ft long or 40 ft long? Are they new with a smooth finish, or old and all pitted?
Anywhere from $10 to $15 sq ft sounds good to me. Be sure to smile when you quote the price, because you know they expect to pay a measly $49.95. After all, you do it all on a computer, don't you?
[ September 04, 2007, 11:17 AM: Message edited by: Si Allen ]
Posted by Tony Vickio (Member # 2265) on :
Ray, I don't know what to charge for the tanks, but before you paint them, go to Lowe's and pick up some Shur-Line Pad Painters! There is a "small" learning curve but you will NEVER (on large stuff) use a foam brush again!! Let me know how you like them!
Tony
Posted by Ray Rheaume (Member # 3794) on :
little more info....
The tanks have been sandblasted and repainted white...nice and smooth.
The first one gets a 130" X 80" red oval with white lettering inside. Second one is 150" X 60"...two lines of text, block lettering, black and blue.
Posted by Jerry VanHorn (Member # 4704) on :
one millllion dollars. I need a vacation.
Posted by William DeBekker (Member # 3848) on :
Not a Clue But we could make them look like big HOT Dogs.. Posted by Michael R. Bendel (Member # 5847) on :
Charge what you'd ask for an MDO sign of the same size & subtract the raw MDO cost.
Add a couple hours for off premise work.
Posted by James Chrimes (Member # 5864) on :
Ray, I think I would be around $500.00 a side, for a basic design. Good luck.
![[Rolling On The Floor]](graemlins/rolf.gif)
![[Smile]](smile.gif)