When your talking about the ultra sonic cleaner are you talking about the same type I use for my Drafting/Rapidograph pens and/or the jewelry type Cleaners. (We have Both) and what do you use in them Thinner or just water. For my pens I use alcohol.
Posted by Bobbie Rochow (Member # 3341) on :
Yes!!! I want to know too!!!
I just searched on the net & found the ones that clean the rapidographs, & wanted to know if this is what he has, & FRANK....what do you use in it to clean your brushes????
Posted by Joey Madden (Member # 1192) on :
UltraSonic with a timer but without a heater and it must have a stainless steel tub.
You can use rapid remover as a cleaner, mineral spirits or just about any solvent you wish. Frank does it using water in the tub and the solvent in special containers which drop into the top which has 2 holes in it. I on the other hand use the solvent directly in the tub and either lay my brushes down into it or hang them depending on how I feel. Been doing it this way for 25 some odd years,
Posted by greg feil (Member # 4379) on :
I purchased a good stainless steel Ultrasonic cleaner off of Ebay. I fill the tank most of the way up with water and suspend a jar filled with rapid remover in the center of that (You could fill the whole tank with RR I suppose). The brushes come out in 5 minutes with no paint on them.
![[Smile]](smile.gif)