Im making a double sided sign that will hang out perpendicular to a building the sign will be approx. 4'h x 3.5'w so I figure ill need a hangar tht is about 4.5' to 5' wide I know a lot of people get them custom made but Ive seen places that sell these already made at meets but I cant remember there name can any one help me with a name or web site
thanks
[ October 14, 2003, 09:18 AM: Message edited by: Richard Doyle ]
Posted by Chuck Gallagher (Member # 69) on :
midwest sign supply has some 3 and 4 foot scroll brackets in the catolog......... midwest Posted by Bob Rochon (Member # 30) on :
Pond Side Iron works 860-599-0477
They add spines the base of thier brackets, eliminating, in most cases any need for wires.
give em a call ask for Cam
[ October 14, 2003, 10:11 AM: Message edited by: Bob Rochon ]
Posted by Richard Doyle (Member # 2919) on :
thanks guy
anymore resources would be appreciated not that I think about it I would like to know where to get custom stuff done too
Posted by Si Allen (Member # 420) on :
For custom brackets...PONDSIDE!!!!
860-599-0477
You won't be sorry!
Posted by Richard Doyle (Member # 2919) on :
ok
does pondside have a website or e-mail adress or should I just call?
Posted by Harris Kohen (Member # 2139) on :
Pondside is a supporter of Letterville im sure you can find their info in the merchants section.
I personally have one of thier sign brackets and let me just tell you, that you get more than your moneys worth when you get one from them. This bracket will definitely outlast my children. It's hurricane proof and tornado proof as long as it's installed properly.
Posted by Richard Doyle (Member # 2919) on :
I couldn't find them on the merchants page
Posted by Kissymatina (Member # 2028) on :
Just call and talk to Cam.
Posted by Bob Rochon (Member # 30) on :
Richard,
Cam can send you out a catalog, I get 98% of my brackets there. the other 2% are for the cheap wads. But any nice sign gets a pondside bracket. Makes my signs stand out not to mention the custom stuff he does for me.
Posted by Brad Gebert (Member # 7610) on :
It's nice to see an active merchant here Brad. I'm going to sit down and go through your website. I for one, prefer to support those who support this great resource. Thanks for doing that!
Posted by Richard Heller (Member # 2443) on :
This is a company we used to use. I am not in the sign business anymore, but they made standard brackets and sign holders. You can also ask them for a catalog.
Raymond Boucher (Northwood Forge) 301 First Nh Tpke, Northwood, NH 03261-3407, United States (Map)
Phone: (603) 942-7142
Also Does Business As:Northwood Forge
SIC:Fabricated Structural Metal
Line of Business:Structural Metal Fabrication
Posted by Cam Bortz (Member # 55) on :
Since my name has come up here, I feel obligated to thank the people who spoke highly of the brackets we make. We still make them, by request, to order. What I no longer do is design custom brackets on spec, as there are folks here who seem to find it perfectly acceptable to take my designs to other fabricators, and get their brackets built on the cheap. That may also explain why I stopped paying merchant dues here. I don't see any reason to spend hard-earned money on advertising to people who apparently have no respect for intellectual property, or who will sell their so-called integrity to save fifty bucks.
![[Applause]](graemlins/clap.gif)
![[Thanks]](graemlins/thanks.gif)
We still make them, by request, to order. What I no longer do is design custom brackets on spec, as there are folks here who seem to find it perfectly acceptable to take my designs to other fabricators, and get their brackets built on the cheap. ![[Mad]](mad.gif)
That may also explain why I stopped paying merchant dues here. I don't see any reason to spend hard-earned money on advertising to people who apparently have no respect for intellectual property, or who will sell their so-called integrity to save fifty bucks. ![[Bash]](graemlins/bash.gif)